For 12" chutes
Cut 4 shroud lines each 24 inches long.
For 15 " chutes
Cut 4 lines at 30" long
For 18" chutes
Cut 4 lines at 36" long
Lay Parachute out and place a sticky disk at each corner. Cut a tiny x in the center of each and tie the ends of the shroud lines to each hole.
make sure there's no tangles, holding all lines together tie the end of all the lines together and the end of the shock cord to the loop on the swivel.
(See picture)
NOTE: this kit does not include Kevlar cord as seen in the pictures.
